American DJ® - www.americandj.com - Accu UFO PRO Instruction Manual Page 14American DJ® - www.americandj.com - Accu UFO PRO Instruction Manual Page 13
Accu UFO PRO System Menu
5-Pin XLR DMX Connectors.
Some manufactures use 5-pin DMX-
512 data cables for DATA transmission in place of 3-pin. 5-pin DMX
xtures may be implemented in a 3-pin DMX line. When inserting stan-
dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,
these adaptors are readily available at most electric stores. The chart
below details a proper cable conversion.
Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)
Pin 1
Pin 5 - Do Not Use
Pin 4 - Do Not Use
Pin 3
Pin 2
Pin 1
Pin 3
Pin 2
Not Used
Not Used
Data True (+ signal)
Data Compliment (- signal)
Ground/Shield
3-Pin XLR to 5-Pin XLR Conversion
Indicate the staring DMX address
A001 also is the setting for slave
Automatically test the function
Runs fixture as “master” or “alone” for auto
Runs fixture as “master” or “alone” for audio
Reset all motors and returns fixture to home
Reset only motors for pan/tilt
Displays the total fixture running time
Clear fixture running time
Reverses the pan movements
Reverses the tilt movements
Switch between 16 bit/8 bit
Display the DMX512 value of each channel
Display turn off after 2mins
This function will reverse the display 180
Change DMX address via external controller
Resets all the fixture functions to default
Pan/tilt feedback (error correction) on/off
Fixture code *code is “C050”
Set the amount of your program
Edit the channels of each scene
Edit program via controller
Accu UFO PRO DMX Set Up
Commentaires sur ces manuels